Please see Ebike error codes and their corresponding descriptions below:
|22||Throttle Fault||Reconnect the wire of the throttle. Find the throttle wire with the orange connector inside, disconnect it and then reconnect it to restart the throttle. If it still doesn’t work, you need to replace the throttle.|
|24||Motor Hall Defect||Reconnect the motor wire. Find the motor wire near the hub motor, disconnect it, and then reconnect it to restart the motor. If the error code is still on the display, please send an email to after-sales with providing a relevant video, the motor serial, bike serial number, and the motor connector, we will help you replace the motor.|
|25||Brake Failed or Brake Applied While Turning On||Unplug the brake levers one by one to confirm whether it is caused by the left or right brake lever. Please check the instruction video https://www.youtube.com/watch?v=Jwp4VPSr2zU.
Try to adjust the screws to see if it can be solved. Please check the instruction video https://youtu.be/Eimq2N6RtoA.
If there is still an error code 25, you need to provide the relevant video, bike serial number and contact the after-sales service to replace the brake lever.
|30||Abnormal Communication||Please do the test according to the video https://www.youtube.com/watch?v=HJf4r-HHfPc&feature=youtu.be.
You need to unplug all the plugs including 7 (2 brake levers, throttle, front light, tail light, sensor, motor wire). At this time, the meter should display error code 24 normally.
After all unplugging, if code 30 still appears on the display, there is a high probability that it is a controller problem.
After all unplugging, if the display shows code 24, then connect the motor cable first. If 30 appears then, it is a motor problem.
If there is no error code after connecting the motor, connect other connections in sequence until the error code 30 appears. It means that code 30 is caused by this connection, and this part needs to replace.
Then provide the relevant video and bike serial number to contact the after-sales service.
|34||Over voltage Protection||Check your battery voltage. Make sure you are using a 48v or 52v battery.|
|23||Motor Phase Line fault||Check your motor for damage.|
Please help our co-pedalers by voting if this article is helpful or not.